The treatment of severe spasticity may require a combination of approaches. One of the most common treatments for spasticity is oral baclofen, which is a muscle relaxant. Although this works for many people, some children need high doses to manage their spasticity. Higher doses may cause side effects, such as weakness, drowsiness, and nausea. However, even high doses may still not treat some children’s spasticity effectively. These patients may want to consider a baclofen pump.
Spasticity involves tight, stiff muscles that make movement — especially of the arms and legs — difficult or uncontrollable. It happens when there is an injury to a part of the central nervous system (the brain or spinal cord) that controls voluntary movements. Common conditions associated with spasticity include cerebral palsy, brain injury, stroke, multiple sclerosis, and spinal cord injury. Spasticity can sometimes be very difficult to control and can get in the way of daily living.
A baclofen pump is a little machine that is placed under the skin of one side of the abdomen (belly) near the hip bone. It is used to deliver baclofen directly into the spinal canal.
The pump is attached to a catheter (tube), which helps direct the medicine right to a specific area of the spinal cord (called the intrathecal space). This allows the medication to be delivered exactly where it works to help reduce the spasticity. When the same medication is given by mouth, only a tiny bit of it actually gets to the area where it works.
The pump delivers medication constantly throughout the day to help relieve spasticity. It can also be programmed to deliver different amounts of medication at different times of the day, if needed. A programmer (a very small computer) is used to tell the pump how much medicine to give. It uses telemetry (similar to radio waves) to communicate with the pump.
Once the pump is implanted and the dose is increased gradually to a level that is working for your child, there will be a notable improvement in their spasticity and comfort. There are no major limitations on activities once the surgery site is healed. Patients can do all the things they were doing previously.
If your doctor recommends a baclofen pump for your child, you will meet with the baclofen pump nurse practitioners and learn about the pump to make sure it is appropriate for your child.
From there, the baclofen pump nurse practitioners will help schedule an appointment with a neurosurgeon. You and your child will meet with the neurosurgeon to discuss the baclofen pump further and plan for the surgery.
Baclofen pump therapy is not suitable for every child, so a trial helps you and your doctors decide if it’s right for you. Having a trial does not mean your child will definitely get a pump as there are many influencing factors. All of them will be discussed with you before any decision is made.
If the trial is successful and your child responds well to the baclofen, we will proceed with placement of the baclofen pump, usually the next day, if this is what you decide.
The trial is a single dose of baclofen and may have a big effect on the tone (tension in the muscles) of your child’s legs. Remember, this effect may be more or less dramatic than the effect from the pump. This is because the pump dosing will be continuous and will be adjusted specifically for your child.
If you and your child’s doctors decide that a baclofen pump is appropriate, the surgery is usually performed the day after the trial. Surgery lasts about two to three hours. The length of surgery will be reviewed at your initial appointment with the surgeon. If your child has had a spine fusion, the procedure may last a little longer.
After the surgery, your child will need to stay in a bed for 24 hours to help prevent headache. After that, your child can get out of bed after getting used to sitting up. You child will stay in the hospital for two to five days after surgery, depending on his or her individual recovery.
At first, the pump is programmed for a very low dose. The team will see your child on an outpatient basis every one to two weeks for small adjustments until the spasticity is improved.
Your child will have one incision at the abdomen (belly) and one incision over the lower spine (low back). There will be dressings over the incisions that include Steri-Strips (white tape strips) across the incisions, which will fall off on their own. Keep them dry for one week after surgery. If they don’t fall off, you may take them off two weeks after surgery. Your child may bathe, swim, or submerge the incisions after two weeks if the incisions are healed.
For a few days to weeks after surgery, your child may have some swelling around the top and sides of the pump. This is from fluid and it is normal. An ace wrap or abdominal binder around the belly helps provide pressure to limit the swelling and to improve comfort. Your child should wear the binder for six to eight weeks after surgery.
If you notice any drainage from the incisions or any redness, contact the Baclofen Pump Team on call through the hospital pager at #7867 (PUMP).
Your child’s baclofen pump will need to be refilled every two to six months depending on the dose. On the front of the pump, there is a silicon port (opening) in the middle. A long, thin needle is used to inject the baclofen through the silicon into this port.
Your child will have the baclofen pump refilled in a clinic at Boston Children’s Hospital or a Boston Children’s Hospital satellite clinic. The visit takes 30 to 45 minutes.
We keep track of when your pump needs to be filled. If you need to change a refill visit, call your nurse practitioner immediately. You must reschedule the visit when you call. If you miss a refill visit, your child could have withdrawal symptoms and need to stay in the hospital.
Having a baclofen pump is generally safe and complications are rare, but can include:
The catheter is firmly secured with stitches by the neurosurgeon. The catheter will move naturally with the spine as your child moves. The catheter will be long enough to allow for room for your child to grow.
The catheter is made of very durable plastic and mesh. It is very rare for a catheter to break, but it can happen. If the catheter breaks, the baclofen will leak and your child will not receive the full dose. Your child will experience the symptoms of under-dosing. Scans and tests can be done to see if the catheter is broken. If the catheter breaks and you decide to continue with treatment, your child will need an operation to have a new catheter put in place.
The battery in the pump lasts seven years. Before that time, your child will need another surgery to replace the pump. We will help keep track of when this will need to happen. In most cases, it is a much simpler surgery.
Overdose is rare. Children can get too much baclofen when a catheter is kinked and then becomes unkinked. This can also be caused by human error when programming the pump or because your child is sensitive to an increase in their dose of baclofen.
Call 617-355-6369, pager #7867 if your child has these signs or symptoms of too much baclofen:
Call 911 if your child:
After a short time, you child’s body will become dependent on baclofen. If for any reason they suddenly stop getting baclofen, it can make them very sick. This can happen because of a problem with the pump, a crack or break in the tubing, or if the pump becomes empty.
Signs that you child is not getting enough baclofen:
If your child has any of these symptoms, page the baclofen pump pager at 617-355-5369, pager #7867 (PUMP).